Member Account   |   Check Order Status  |   Favorite List  |   Shopping Cart  |   FAQ  |   Login   |   Signup   |  
Cytron Technologies - Robot . Head to Toe
      
Change Currency to :
  
Home Products Training Tutorial Forum Support Distributor About Us Contact Us
  Product Groups
  Project DIY
  Support Materials
  Payment Methods


Share :         

LCD keypad Shield
Product Code : SHIELD-LCD
Stock Status : 0
Retail Price : RM 40.00
Internet Price :
RM 34.90(1 to 9)
RM 32.11(10 to 49)
RM 26.18(50 and above)
Weight : 0.100 kg

Description
We are now carrying the LCD Keypad sheild. Suitable for Arduino main board which include the Arduino Uno and Leonardo. It is sometime call navigation sheild because it comes with 6 momentary push buttons for menu navigation. Besides the push button, it also includes an 2x16 LCD.

Features: Works with: Arduino Uno, Arduino Mega and Arduino Duemilanove.

* LCD schematic attached, the power LED is not populated.



Useful Document
Right Click > Save Target As
No. File Description Action
1 Using LCD4Bit_mod  Download
2 Schematic  Download
3 Arduino 1.0 Compatible Library (Thanks to Glendon Klassen)  Download
4 User's Manual V1.0 July 2011   Download
5 Arduino 1.0 LCD4Bit_mod Library   Download
6 Fritzing File  Download
7 Fritzing Tutorial  Download


Accessories you may need
ARDUINO-UNO



Post Enquiry
Product Enquiry
lovetronic  2014-02-22 00:08:23
Does the shield compatible with chipkit uno 32 from digilent?
Admin Reply :
Nop, although the pins from chipkit Uno32 is compatible with Arduino UNO, but it is 3.3V operated, while this LCD shield is 5V. If you have further inquiry, please do discuss in our technical forum as this section is for short inquiry, thanks :)

Parshad  2014-01-22 21:56:10
The LCD's backlight works only when RESET button on LCD shield is pressed. Otherwise its off. I tried tweaking the potentiometer, but thats for contrast. I have a blue backlight. Any solution ?
Admin Reply :
I think you din control it in your sketch. The backlight is controlled by D10 pin of Arduino, do check the schematic :) If you have further inquiry, please do discuss in our technical forum as this section is for short inquiry, thanks :)

Thian Xian Khai  2013-12-05 18:58:42
Hi,I just bought the LCD Shield and an Arduino Mega 2560. It seems that I can't fit the shield on top of the mega perfectly or is there something that I'm missing/should do?
Admin Reply :
Hi, we have tested, it fits perfectly :) Maybe you should check the orientation and the pins. If possible, please do share a few photos in our technical forum :)

Romero Yap  2013-11-29 20:04:15
dear admin, i have just found out that the lcd has a potentiometer which adjust the brightness. problem solved ! :)
Admin Reply :
:)

Romero Yap  2013-11-28 17:31:03
hi, ive tested the LCD Shield and apparently i have this problem, Please kindly advice http://forums.adafruit.com/viewtopic.php?f=47&t=34405
Admin Reply :
Hi, are using the library download from the product page? Because the LCD shield from the link you gave is different. Anyway, please do discuss in our technical forum where you can share some photos of the hardware as in the link you give. Thanks :)
Page : 1 , 2 , 3 , 4 , 5 , 6 , 7